-13%
The system operates on AC power with a voltage range of 90-270 VAC at 50 Hz, drawing 2.3 amps. It requires a minimum wire size of #14 AWG (2.0 mm²) with 600V insulation. The battery backup supports lead-acid batteries, with a charging circuit that provides a normal flat charge of 27.6V at 0.8 amps. The charger can handle up to an 18 Amp-hour battery. For sound output, it has 16 general alarm zones, operating in Class B mode, with a normal operating voltage of 24 VDC. Alarm current threshold is 15 mA, with a maximum short circuit current of 42 mA and a maximum loop resistance of 100 ohms. Each zone supports two alarmed detectors. The system’s standby current is 7.26 mA. There are three relay outputs with contact ratings of 2.0 amps at 30 VDC or 30 VAC (resistive). The non-resettable 24 VDC power supply provides a maximum ripple voltage of 10 mVRMS, operating at a nominal 24V with a total current capacity of 500 mA. The recommended maximum standby current is 150 mA.
Table Format:
| Specification | Details |
|---|---|
| AC Power | AC90-270 VAC, 50 Hz, 2.3 amps |
| Wire Size | Minimum #14 AWG (2.0 mm²) with 600V insulation |
| Battery | Lead-acid only |
| Charging Circuit | 27.6V @ 0.8 amp (Normal Flat Charge) |
| Maximum Charger Capacity | 18 Amp-hour |
| Sound Output Device Circuits | General Alarm Zones 1 through 16 (Class B) |
| Operating Voltage (Normal) | 24 VDC (ripple = 100 mV max) |
| Alarm Current | 15 mA threshold |
| Short Circuit Current | 42 mA max |
| Maximum Loop Resistance | 100 ohms |
| End-of-Line Resistor | 4.7K, ½ watt |
| Detector Loop Support | 2 alarmed detectors per zone |
| Standby Current | 7.26 mA |
| Relay Outputs | 3 relays, 2.0 amps @ 30 VDC/30 VAC |
| Nonresettable 24 VDC Power | 24 volts nominal, ripple ≤ 10 mVRMS |
| Total DC Current Available | Up to 500 mA |
| Recommended Max Standby Current | 150 mA |
Reviews
Clear filtersThere are no reviews yet.